| Customization: | Available |
|---|---|
| Heat Temperature: | 50-70°C |
| Work Environment: | Common Heat Pump |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Models Parameter |
CSFXRS-4 I | CSFXRS-8 I | CSFXRS-12 II | CSFXRS-20 II | CSFXRS-40 II | CSFXRS-50 II | CSFXRS-60 II | ||
| Hot Water Heating Capacity | kW | 4 | 8 | 12 | 20 | 40 | 50 | 60 | |
| input power | kW | 0.82 | 1.64 | 2.5 | 4.1 | 8.3 | 10.2 | 12.5 | |
| input current | A | 4.3 | 8.6 | 4.5 | 7.4 | 14.9 | 19.2 | 23.2 | |
| rated hot water outlet temperature | 55 | ||||||||
| maximum hot water outlet temperature | 60 | ||||||||
| Power Supply | 220V/50Hz | 380V/50Hz | |||||||
| compressor | type | rotor type | scroll type | ||||||
| Start Method | Direct Start | ||||||||
| quantity | pc | 1 | 1 | 1 | 1 | 2 | 2 | 2 | |
| source side heat exchanger | type | coaxial heat exchanger/plate type heat exchanger | shell and tube heat exchanger | ||||||
| water flow | m³ /h | 0.55 | 1.1 | 1.6 | 2.7 | 5.5 | 6.9 | 8.3 | |
| Water | kPa | < 20 | < 38 | < 40 | |||||
| pipe size | mm | DN20 | DN20 | DN20 | DN25 | DN32 | DN32 | DN50 | |
| application side heat exchanger | type | shell and tube heat exchanger/coaxial heat exchanger | shell and tube heat exchanger | ||||||
| water flow | m³ /h | 0.69 | 1.4 | 2.1 | 3.4 | 6.9 | 8.6 | 10.3 | |
| Water pipe size | kPa | < 20 | < 35 | < 40 | |||||
| mm | DN20 | DN20 | DN20 | DN25 | DN32 | DN32 | DN50 | ||
| Protection | high pressure and low pressure protection, anti-freezing protection, high temperature | ||||||||
| protection, safety valve, overload protection, lack phase protection, reverse phase | |||||||||
| protection, water flow protection ect. | |||||||||
| refrigerant | type | R22/R410A/R407C/R134A | |||||||
| Throttle Type | thermostatic expansion valve | ||||||||
| quantity | kg | 0.8 | 1.1 | 1.9 | 2.8 | 2.7× 2 | 3.4× 2 | 4.5× 2 | |
| Noise | dB ( A ) | 32 | 35 | 38 | 42 | 62 | 62 | 62 | |
| Weight | kg | 40 | 45 | 69 | 93 | 340 | 440 | 570 | |
| Testing conditions: 1. application side initial water temeprature: 15 degree, end temperature degree 2. source side water inlet temperature 15 degree, outlet temperature 10 degree |
|||||||||
){kind=link}